Debonding rubber coating from casted water valve (recycling)

A four turn helical coil is used for debonding the rubber coating from the water valve. Power is applied for 2 minutes to heat the water valve ...
[more about bonding][Applications]

Shrink fitting a carbide ring into a valve seat

A three turn helical coil is used to heat the steel valve seat. The steel valve seat is placed in the coil and heated for 50 seconds to enlarge the center hole & drop the carbide ring in for the shrink fitting process.
[more about shrink fiting][Applications]

Brazing brass faucet assembly

A two turn C shaped coil is used to braze the faucet assembly. The braze rings are placed at the joint, the parts assembled and fluxed...
[more about brazing][Applications]

Preheating steel bar stock to forge a hot formed u-bolt

A fifteen turn helical coil with ceramic insert is used to preheat
the 15” (381 mm) section of steel bar stock. Power is supplied for 9.90 seconds to heat the whole piece to 1500 ºF (816 ºC). The piece is then placed in a die and formed into a u-bolt....
[more about heating][Applications]