Why is the Fault light lit and why won't my EASYHEAT heat my part?

EASYHEAT monitors itself to ensure your safe operation. The *Fault light tells you that a condition exists that prevents heating.

Check:

• cooling water turned on?
• flow switch connected at rear panel?
• induction coil is clean, NOT shorted?
  
  If, after ensuring the above are OK, re-try HeatOn. Read your manual for more guidance.

Brazing a steel piston valve assembly

A five turn pancake coil is used to braze the piston valve and steel plate. The assembly was heated for 10 minutes to flow the braze and join the two pieces...
[more about brazing][Applications]

Brazing a steel die into a wire drawing guide

A two-turn helical coil is used for brazing the assembly. Two different bonding agents are tested for the brazing application. The first bonding agent used is braze paste. The assembly is heated to 1382 ºF (750 ºC) and is brazed in 45 seconds.... [more about brazing][Applications]

Levitation melting of steel balls

A conical coil is used with a total of five turns with two turns on the bottom, a central turn and two turns wound the opposite direction on the top, this creates opposing fields that causes the steel ball to levitate. ... [more about melting][Applications]

Curing a coating on both sides of an aluminum piston

A three turn channel coil 19” (48.26cm) long is used to anneal 4 pistons running though the coil with a distance of 6” (15.24cm) between centers.... [more about curing][Applications]

Continuous annealing of copper wire

A twelve turn helical coil is used. A ceramic tube is placed inside the coil to isolate the copper wire from the copper coil and to allow the copper wire to flow smoothly through the coil. Power runs continuously to anneal at a rate of 16.4 yds (15m) per minute.... [link][more about annealing][Applications]

Ambrell group introduces induction heating solutions for Europe

Ambrell is renewing their focus on providing money-saving, non-contact induction heating solutions to the European market in 2009. Despite the economic downturn, Ambrell Europe sees significant business potential in continental Europe.
[press release][Pressemitteilung][Communiqué de presse]