A twelve turn helical coil is used. A ceramic tube is placed inside the coil to isolate the copper wire from the copper coil and to allow the copper wire to flow smoothly through the coil. Power runs continuously to anneal at a rate of 16.4 yds (15m) per minute.... [link][more about annealing][Applications]
2 comments:
any information on stress relief annealing after tube bending using induction coil heat? Stress relief annealing of the bend area?
Do you need Annealed wire?
Please visit http://www.meshbiz.net/Annealed-Wire.html
Post a Comment